Hello Dave,
Nomex paper (sheet stock) will do the trick, I believe.
Best regards, Art Michael, Editor, IPSN
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
| http://www.safetylink.com |
| |
| The Safety Link is the most comprehensive collection |
| of product safety and standards links on the WEB |
| |
| Int'l Product Safety News |
| (It's our 15th Anniversary 1988-2003 |
| P.O.Box 1561 - WWW |
| Middletown CT 06457-8061 U.S.A. |
| Phone: (860) 344-1651 Fax: (860) 346-9066 |
| email: [email protected] |
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
On Tue, 12 Aug 2003 [email protected] wrote:
>
> I need a sheet of plastic that goes between a PCB and a metal
> enclosure. This is to make a creepage spec. What plastics are good for
> this? Will polycarbonate be suitable and have a 94V-0 rating? Thanks.
>
> Dave Cuthbert
> Micron Technology
>
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
