Derek,
A hi-pot tester should fall under EN 61326, Electrical equipment for
measurement, control and laboratory use-- EMC requirements.
The foreward in my copy of IEC 61326 edition 1.0 2002-02 says that it
replaces IEC 61326-1:1997+A1:1998+A2:2000. This is a little confusing,
^^
because the July 22, 2003 listing of harmonized standards under the EMC
Directive ( http://europa.eu.int/eur-lex/en/dat/2003/c_172/
c_17220030722en00020015.pdf ) says that:
* EN 61326:1997 is the same as IEC 61326:1997.
* EN 61326:1997 Amendment A1:1998 is the same as IEC 61326:1997
Amendment A1:1998.
* EN 61326:1997 Amendment A2:2001 is the same as IEC 61326:1997
Amendment A2:2000.
John Barnes KS4GL, PE, NCE, ESDC Eng, SM IEEE
dBi Corporation
http://www.dbicorporation.com/
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
