In the US I believe it to be exempt as per 15.103(c). Otherwise it will
probably fall under 61326 (lab equipment) or the Generic for light
industrial.

Bob Heller
3M EMC Laboratory, 76-1-01
St. Paul, MN 55107-1208
Tel:  651- 778-6336
Fax:  651-778-6252
=======================================================


                                                                              
                                                        
                      [email protected]                                      
                                                        
                      Sent by:                     To:       [email protected]
                                                        
                      owner-emc-pstc@majordo       cc:                        
                                                        
                      mo.ieee.org                  Subject:  PC noise and a
standards question                                         
                                                                              
                                                        
                                                                              
                                                        
                      08/11/2003 09:12 AM                                     
                                                        
                      Please respond to                                       
                                                        
                      Lfresearch                                              
                                                        
                                                                              
                                                        
                                                                              
                                                        




Morning folks,

A few weeks ago I asked for help finding a quiet MB. Well, I finally have
got boards in and tested.

I can't name names on the list, but, the best MB came from a US, Vancouver
based company.

Two big problems with ALL MB's. Plug in a PS/2 mouse, and the emissions
dramatically increase. Also, this happens with the KB too. It would seem
that the designers of the boards put a switched mode power supply right
next to the connectors: not a smart move in my opinion.

Anyway, this leads me to another question where I could do with some
guidance:

I'm testing a device that basically does HI-Pot testing on electrical
equipment. What classification of equipment is this, and what product
standard would I use to specify the EMC tests to run? I can only believe
that this is light industrial equipment.

Thanks,

Derek N. Walton
Owner L F Research EMC Design and Test Facility
Poplar Grove,
Illinois,  USA
www.lfresearch.com





This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc

Reply via email to