I read in !emc-pstc that Barker, Neil <[email protected]> wrote (in <[email protected]>) about 'IEC 60320 connector and cable' on Thu, 18 Sep 2003:
>Incidentally, unless there is a good reason by virtue of the >installation instructions for supplying stripped ends (e.g. the >equipment is intended to be only permanently connected) then you should >be supplying a power lead with an attached plug for the destination >country. There are at least three variations throughout Europe. For professional equipment (as defined in IEC/EN 61000-3-2) there is no *requirement* to supply a lead with a mains plug. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
