I suggest you start with Annex 1 of the Machinery Directive. Contact me direct if you need links to where this can be found on the Web, or if you need more help.
Regards Nick. At 9:42 -0500 2/9/03, Stevens, Morris wrote: >Hello to the group: >I have recently been tasked with developing a product safety audit for our >new and existing products. We manufacture precision tracking radar's used by >the US and other (European and Asian) defense departments at aircraft and >weapons test ranges. > >I have only experience with Occupational Safety and Health, and that seems a >good place to start, with 40CFR1910 (OSHA). I have a copy of BS7671:1992 >also, but it seems to address only electrical safety. > >Does anyone have a sample product safety audit to share that I can use as a >template to get started? > >Thanks in advance, >Morris Stevens >Quality Engineer, BAE SYSTEMS >Ft. Walton Beach, Fl. USA >[email protected] <[email protected]> > e-mails, call FK, reply to e-mail This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
