Brian, As I understand it ISO/IEC 17025 replaced ISO/IEC Guide 25.
The answers to your other questions will depend on who you are using for your NCB. Regards, Josh From: Brian O'Connell [mailto:[email protected]] Sent: Monday, October 20, 2003 11:30 AM To: [email protected] Subject: CB, SMT, & TMP Good People IECEE 02, cl C1.2 requires lab conformity to "...clauses 7 to 11 of ISO/IEC Guide 25...". I have ISO/IEC 17025, but not the previous standard. What clauses in ISO/IEC 17025 are equivalent to ISO 25 clauses 7 through 11 ? What is basis of competency testing, done to accredit the lab for SMT, that is required by an NCB of manufacturer's test lab personnel and facility, that is above and beyond that required in cl 5.4.5 of ISO 17025 ? In cl C2.3 - what is definition of a "production" sample ? Are there other standards that provide guidance to acceptance of manufacturer's test data for use in an NCB-generated CB Report ? What is the basis for allowing an NCB to accept manufacturer's test data for and to only review (not write) the CB Report under SMT in accordance with IECEE 02, Annex C ? Thanks much for any guidance and insight that can be shared. luck, Brian This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
