Alex, The FCC does not accept Amendment A1:2000 to CISPR 22:1997. They have not accepted the ferrite clamps, and with the work that is going on in CISPR SC I to remove the clamps from CISPR 22:2003 the work in ANSI C63 to add them to ANSI C63.4 has ceased.
Likewise, the FCC does not mandate telecommunication port conducted emissions testing. The FCC will allow you to test to the radiated emissions limits from 30 MHz to 1 GHz in CISPR 22 in lieu of the limits called out in 15.109 of the FCC Rules, but you must still use the test methods in ANSI C63.4. If testing above 1 GHz is required under the FCC Rules based on the maximum clock used in the product, that testing must also be performed, regardless of which limits were used below 1 GHz. Ghery Pettit Intel Corporation From: [email protected] [mailto:[email protected]] On Behalf Of Alex McNeil Sent: Friday, October 10, 2003 1:22 AM To: [email protected] Subject: CISPR22 applicability for ITE Hi Guys, Q1: Is it true that USA and Canada accept CISPR22:1997/A1:2000 instead of FCC Part 15 and ICES-003? and only if tested per ANSI C63-4:2002 methods? Q2: Is it true that Australia now accepts EN55022:1998 or CISPR22:1997+A1:2000 and/or CISPR22:2003 4th Edition? Kind Regards Alex McNeil Principal Engineer ________________________________________________________________________ This email has been scanned for all known viruses and appropriate content by the Messagelabs mail service. This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
