Alex,

About Q2: I copy a posting from Sept. 8th on a similar question that I
raised at that time.
As CISPR22, 4th ed is not published in the OJ yet as an EN55022, it cannot
be used yet.

*****************
The EMC regulations in Australia allow compliance with any of the following
for IT type equipment:
a)  AS/NZS 3548:1995 or AS/NZS CISPR 22:2002; or
b)  CISPR 22:1997 + Amdt 1:2000 or CISPR 22:1997 + Amdt 1:2000 + Amdt
2:2002; or
c)  EN 55022:1994 + Amdt 1:1995 + Amdt 2:1997 (until Aug 05) or EN
55022:1998 or EN 55022:1998 + Amdt 1:2000

For European standards the Australian EMC regulations specifically states
the following:-
"Transitional arrangements for amendments to the standards are:
-  Two (2) years for IEC, CISPR, AS/NZS standards at the time of publication
-  transitional period as published in the Official Journal of the European
Communities for EN standards

This means that if you choose to declare compliance to European standards
now that Europe has officially revised the "cessation date" for EN
55022:1994 to Aug 05 then compliance with EN 55022:1994 is acceptable in
Australia until Aug 05.

In July I prepared a table identifying what standards were acceptable in
Australia and until what dates they were acceptable.  I have attached this
information in a PDF file.  Please note it reflects the then official OJ
listed "cessation date" for EN 55022:1994 (i.e. Aug 03).  Now the OJ has
officially revised this date to Aug 05 this standard would be acceptable
until then.

I hope you and others in the group find the table informative and useful.



Best regards,
Kevin Richardson

Stanimore Pty Limited
Compliance Solutions for Technology Products
(Legislation/Regulations/Standards/Australian Agent Services)
Ph:       02-4329-4070       (Int'l: +61-2-4329-4070)
Fax:      02-4328-5639       (Int'l: +61-2-4328-5639)
Mobile:  04-1224-1620       (Int'l: +61-4-1224-1620)
Email:    [email protected]
*****************


Vriendelijke Groeten, Best regards, Meilleures salutations,

Kristiaan Carpentier
Regulatory and Approval Engineer
Thomson multimedia Broadband Belgium N.V., S.A.
Prins Boudewijnlaan 47, B-2650 Edegem, Belgium
Tel: +32 3 443 6407 - Fax: +32 3 443 6632
e-mail: [email protected]
www.speedtouch.com



From: Alex McNeil [mailto:[email protected]]
Sent: vrijdag 10 oktober 2003 10:22
To: [email protected]
Subject: CISPR22 applicability for ITE



Hi Guys,

Q1: Is it true that USA and Canada accept CISPR22:1997/A1:2000 instead of
FCC Part 15 and ICES-003? and only if tested per ANSI C63-4:2002 methods?
Q2: Is it true that Australia now accepts EN55022:1998 or
CISPR22:1997+A1:2000 and/or CISPR22:2003 4th Edition?

Kind Regards
Alex McNeil
Principal Engineer


________________________________________________________________________
This email has been scanned for all known viruses and appropriate content by
the Messagelabs mail service.


This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc


This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc

Reply via email to