Alex, CISPR22 can be used but do not override the FCC requirements e.g. part 15.33 indicates for intentional radiators testing up to the 10th harmonic of the fundamental (if the fund. is below 10GHz) or test up to 40GHz which ever is lower. Also for unintentional radiators the highest frequency generated within the device also indicates the upper freq. of measurement e.g. for signals being generated within the EUT between 500MHz to 1000MHz, test up to 5GHz. CISPR22 does not mandate testing above 1GHz and most ITE (nowadays)will require testing above 1GHz to meet the requirements of FCC rules.
Andy _____________________________ Andy White EMC Engineer Nokia Mobile Phones San Diego, CA Tel 858 831 4534 [email protected] _____________________________ From: ext Alex McNeil [mailto:[email protected]] Sent: Friday, October 10, 2003 1:22 AM To: [email protected] Subject: CISPR22 applicability for ITE Hi Guys, Q1: Is it true that USA and Canada accept CISPR22:1997/A1:2000 instead of FCC Part 15 and ICES-003? and only if tested per ANSI C63-4:2002 methods? Q2: Is it true that Australia now accepts EN55022:1998 or CISPR22:1997+A1:2000 and/or CISPR22:2003 4th Edition? Kind Regards Alex McNeil Principal Engineer ________________________________________________________________________ This email has been scanned for all known viruses and appropriate content by the Messagelabs mail service. This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
