I have a question about 60950-1 based on what I suspect might be an error.
In Table 5B listing voltages for hipot tests, the second last column from the right shows a 500V test for Functional insulation but no test for Basic, Supplemental, or Reinforced insulation. Is this an error or am I missing something? It seems to me that this should be reversed. Thanks, Jim Eichner, P.Eng. Compliance Engineering Manager Xantrex Technology Inc. e-mail: [email protected] web: www.xantrex.com Any opinions expressed are purely accidental. Confidentiality Notice: This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. From: Peter L. Tarver [mailto:[email protected]] Sent: Friday, December 05, 2003 9:33 AM To: PSTC Subject: UL60950-1 update For those interested, UL60950-1 has been updated, as of 26NOV2003. Below is a summary of the changes. "These revisions are being issued to remove the UL effective date information from the Preface. UL effective date information, including the most recent, updated effective date information, will be available on UL's website. These revisions also include the corrections of errors in 3.1.9, Annex C, and the second entry for 5.1.8.2, 5.1.8.3 in Annex NAA." Regards, Peter L. Tarver, PE [email protected] This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
