I read in !emc-pstc that Sam Wismer <[email protected]> wrote (in <000f01c3e4d9$ba985f10$0901000a@SAMW>) about '802.11a FCC and CE' on Tue, 27 Jan 2004:
Nothing that I've kept. > This standard has been adopted >as a European Norm I didn't receive either the OP's message or Barbara Judge's, but I'd just like to point out that ENs are not 'European Norms', which are standards originally produced by the European Coal and Steel Community, but European Standards. This matters if you are looking at European Commission, CENELEC or CEN web sites, and maybe in other circumstances. Unfortunately, 'European Specifications', with the designator ES, are being introduced. Confusion will increase. The designator 'EN' is not due to French influence: the French designator should be 'NE' (Norme Européenne). -- Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
