Hi all, I've got a problem with my HP8542E EMI receiver: One of its features - very useful for automated measurements - is the possibility of creating an internal list of points (SIGNAL LIST), and we can save it on a floppy disk as a .SIG file. We can as well recall from floppy disk any .SIG file previously saved to remeasure at all the frequency points stored. Now, I have loaded a .SIG file that was somehow corrupted, so now I can neither edit the list nor delete it. I don't know in which kind of internal memory the list is stored, but any switch off or preset of the receiver leave it inaltered. Do anybody know how to completely preset the receiver to the factory default? Is there some kind of service menu accessible or a sort of recovery software available ? I know i couId send the receiver to Agilent to repair, but I'm up to my ears in work and I can't do without the receiver for more than two days, so I would try to solve the problem myself......... Thanks Paolo ************************************************** Paolo Peruzzi Esaote S.p.A. Research & Product Development - Design Quality Control via di Caciolle, 15 I- 50127 Florence tel: +39 055 4229469 fax: +39 055 4229422 e-mail: [email protected] ************************************************** This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
