This looks like a solution I can work with. I would like to thank the
many
contributors of this list for their valuable input on this subject.
Regards,
Joe
From: Peter L. Tarver [mailto:[email protected]]
Sent: Tuesday, February 17, 2004 5:40 PM
To: 'EMC PSTC'
Cc: Finlayson Joseph-G3162C; 'Price, Ed'; 'Gary McInturff'
Subject: RE: DC Current Probes
Joe -
I use several current shunts. 50 mV : 50 A is the most commonly used in my
lab. I also have:
50 mV : 5 A
50 mV : 10 A
50 mV : 100 A
50 mV : 150 A
You can calculate the impedance of these shunts from the
ratios mentioned above.
They are available from Grainger and cost under $45.00 for
the smaller sizes and $65.00 for a 50 mV : 500 A unit. Go
to Grainger's web site and do a keyword search on shunt.
http://www.grainger.com/
Aside from their use as stand alone pieces, I also build
them into mode complicated test jigs.
Regards,
Peter L. Tarver, PE
[email protected]
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ieee-pses.org/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
