I read in !emc-pstc that [email protected] wrote (in <ofad7bdfdf.6c07ff68-on86256e7d.0042227c-86256e7d.00422...@mmm.com>) about 'Fw: EN 50371' on Wed, 21 Apr 2004: >EN 50371 (Generic standard to demonstrate the compliance of low power >electronic and >electrical apparatus with the basic restrictions related to human exposure >to electromagnetic >fields - 10 MHz to 300 GHz) is harmonized under the R&TTE Directive and has >a DOW of >October 1, 2004. > >This document provides exposure limits but does not provide test methods. >It references >two other documents (EN ISO/IEC 17025 and Council Recommendation >1999/519/EC of >12 July 1999) Neither of these documents have test methods nor do they >reference any >documents that do. > >In this case, what test methods are valid? Or can you use any test method >that you deem >to be valid as long as you document the test method used?
Those lovely people at BSI just sent me the answer. You need to look at EN 50392. -- Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
