I read in !emc-pstc that Kurt Fischer <[email protected]> wrote (in <039101c42681$2f9b2570$6400a8c0@HYPERC1033>) about 'EN61000-3-2 repeatability test' on Mon, 19 Apr 2004: >I would suggest using something like an incandescent light bulb to run the >test and check the repeatability of the instrumentation and test setup.
That won't produce any harmonics other than those caused by defects in the supply source. High-order harmonics will measure as zero, which tells you nothing. -- Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
