http://www.ieee-pses.org/symposium http://www.emc2004.org/
Sorry to hear your tail of troubles. I bought a used printer over E-bay with the same result. Both cartridges were almost empty with a mess in the bottom of the chassis. Cost $50 to replace the cartridges. That was the cost difference in a demo (used unit) and a new one. There are plenty of rocker switches around Silicon Valley. You need to measure the hole size and head for Anchor, ACE, Surplus Solutions, or Halted. Call me if you need addresses. Fred 408-263-8768 robert Macy wrote: >http://www.ieee-pses.org/symposium > http://www.emc2004.org/ >-------------------------------------------------- > >Group, > >For the first time ever, in an attempt to economize, I used >a black ink refill kit to refill my HP Deskjet 500 inkjet >cartridge. > >Followed directions, a bit messy, no dripping, printer >worked great to run some emergency printouts, BUT... > >Overnight all the ink dripped out of the cartridge down >into the printer - while power was on. Result - dead >printer. Took printer all apart, cleaned everything [four >hours], dried, and reassembled. Printer works [nothing got >smoked], BUT... > >Somewhere during the hassle with all the black ink, paper >towels, and mess; I threw away the On/Off switch assembly. > > >Does anyone have an ON/OFF switch assembly from an HP >Deskjet 500 Printer? Consists of panel mount rocker switch >and cable to connector. > >So I share my misadventure to save others of the misfortune >of a leaking cartridge. And hopefully, someone has the >assembly I need lying around their lab. > > - Robert - > > Robert A. Macy, PE. . [email protected] > 408 286 3985. . . . . . . fx 408 297 9121 > AJM International Electronics Consultants > 101 E San Fernando, Suite 402 > San Jose, CA 95112 > >------------------------------------------- > >This message is from the IEEE Product Safety Engineering Society >emc-pstc discussion list. > >IEEE PSES Main Website: http://www.ieee-pses.org/ > >To post a message send your e-mail to [email protected] > >Instructions for use of the list server: > > http://listserv.ieee.org/listserv/request/user-guide.html > >List rules: http://www.ieee-pses.org/listrules.html > >For help, send mail to the list administrators: > > Ron Pickard: [email protected] > Dave Heald: [email protected] > >For policy questions, send mail to: > > Richard Nute: [email protected] > Jim Bacher: [email protected] > >All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > > > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. IEEE PSES Main Website: http://www.ieee-pses.org/ To post a message send your e-mail to [email protected] Instructions for use of the list server: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
