http://www.ieee-pses.org/symposium http://www.emc2004.org/
-------------------------------------------------- 
Someone commented that since OSM decisions are issued by CENELEC they should
be considered as National Deviations. I would caution against this for the
following reasons
 
1. My understanding is that OSM decisions are not legally binding as they are
standard interpretation agreements amongst participating CENELEC Members. Only
the standard is legally binding. I was advised of this by several of the
Technical Experts at TUV  in Germany 
2. In some cases these decisions may actually relax the current standard
requirements. In this case a relaxation may be accepted by countries in the EU
but may not be valid in non EU member countries such as in Asia/ Pacific,
etc..... 
 
As Scott mentioned in some cases OSM decisions are interpretation agreements
amongst the CENELEC Members to accept a modification to the current standard
until they can be incorporated into the next edition or amendment. OSM
Decisions are useful in that they can help to clear up some of the gray areas
in the standard but in any case you should always follow the official standard
and when in doubt use the most stringent requirement as this will help to
avoid problems when going for National Certifications outside the
EU................
 
 

From: [email protected] 
mailto:[email protected]] On Behalf Of Scott Barrows
Sent: Monday, August 09, 2004 11:17 AM
To: [email protected]; EMC-PSTC List
Subject: Re: Where are National Deviations for IEC Standards?



http://www.ieee-pses.org/symposium http://www.emc2004.org/

http://www.ieee-pses.org/symposium http://www.emc2004.org/
-------------------------------------------------- 
Are not OSM's guidelines similar to UL PAG's? Interpretations of paragraphs
that may be assimilated into the standards at some tome in the future. Not
really country, associated deviations to a standard.
 
S

----- Original Message ----- 
From: Peter L. Tarver <mailto:[email protected]>  
To: EMC-PSTC List <mailto:[email protected]>  
Sent: Monday, August 09, 2004 10:36 AM
Subject: RE: Where are National Deviations for IEC Standards?

http://www.ieee-pses.org/symposium
          http://www.emc2004.org/


Don't forget, Scott, that there are also the OSM Decisions
for the EU.  These are downloadable through links on the CB
Scheme web site ( http://www.cbscheme.org).

I'm not aware of a single location where all deviations are
located; not even the CB Bulletin, since it doesn't seem to
include the OSM Decisions.


Regards,

Peter L. Tarver, PE
[email protected]


> From: Arthur Michael
> Sent: Friday, August 06, 2004 10:19 PM
>
> Hi Scott,
>
> As far as I know, the deviations are only listed
> in the CB Bulletins. A
> new set was just released in MAY 2003. They are
> numbers #107A and #107B.
> You can find them at the IEC Webstore.
>
>
>
>
> On Sat, 7 Aug 2004, Scott Douglas wrote:
> >
> > Fellow Listpeoples,
> >
> > Would someone please tell me where I can find
> all of the national
> > deviations for a given IEC standard? I know a
> test lab can / will add
> > these to your test report if you ask (and pay)
> for them. But if I want
> > to know what are the Japan deviations for  IEC
> 60065 for example, where
> > can I find the list? Is it available online, or
> is it one of those buy
> > this from the IEC web store things?
> >
> > Any help will be appreciated.
> >
> > Scott Douglas, NCE
> > [email protected]
> >



This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.

IEEE PSES Main Website:  http://www.ieee-pses.org/

To post a message send your e-mail to [email protected]

Instructions for use of the list server:

    http://listserv.ieee.org/listserv/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:

     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc


------------------------------------------- 

This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. 


IEEE PSES Main Website: http://www.ieee-pses.org/ 


To post a message send your e-mail to [email protected] 


Instructions for use of the list server: 


http://listserv.ieee.org/listserv/request/user-guide.html 


List rules: http://www.ieee-pses.org/listrules.html 


For help, send mail to the list administrators: 


Ron Pickard: [email protected] Dave Heald: [email protected] 


For policy questions, send mail to: 


Richard Nute: [email protected] Jim Bacher: [email protected] 


All emc-pstc postings are archived and searchable on the web at: 


http://www.ieeecommunities.org/emc-pstc
------------------------------------------- 


This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. 


IEEE PSES Main Website: http://www.ieee-pses.org/ 


To post a message send your e-mail to [email protected] 


Instructions for use of the list server: 


http://listserv.ieee.org/listserv/request/user-guide.html 


List rules: http://www.ieee-pses.org/listrules.html 


For help, send mail to the list administrators: 


Ron Pickard: [email protected] Dave Heald: [email protected] 


For policy questions, send mail to: 


Richard Nute: [email protected] Jim Bacher: [email protected] 


All emc-pstc postings are archived and searchable on the web at: 


http://www.ieeecommunities.org/emc-pstc 

------------------------------------------- 

This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. 


IEEE PSES Main Website: http://www.ieee-pses.org/ 


To post a message send your e-mail to [email protected] 


Instructions for use of the list server: 


http://listserv.ieee.org/listserv/request/user-guide.html 


List rules: http://www.ieee-pses.org/listrules.html 


For help, send mail to the list administrators: 


Ron Pickard: [email protected] Dave Heald: [email protected] 


For policy questions, send mail to: 


Richard Nute: [email protected] Jim Bacher: [email protected] 


All emc-pstc postings are archived and searchable on the web at: 


http://www.ieeecommunities.org/emc-pstc 


Reply via email to