http://www.ieee-pses.org/symposium
          http://www.emc2004.org/


Is not a contradiction
 FCC cover the item that in europe are covered by two standards: classical EMC
(EN 301-489-3) and radio parameter that are covered by radio ETSI standard.
So during Classical EMC test you exclude the transmit frequency, during the
radio test you measure also the transmitt frequency.
Paolo

_________________________________________________

Paolo Gemma

Siemens Mobile Communications  S.p.A.

SMC PG MW ST EMC & Safety

SS Padana sup. KM 158 20060 Cassina de' Pecchi (MI) Italy

phone +39 02 9526 6587    fax +39 02 9526 6375

mobile +39 348 3690185

e-mail [email protected]

_________________________________________________



> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]
> Sent: venerdì 2 luglio 2004 10.26
> To: '[email protected]'; [email protected]
> Subject: FCC contradicts with EN310 489 - 3 Clause 4.3
>
>
> http://www.ieee-pses.org/symposium
>           http://www.emc2004.org/
> --------------------------------------------------
>
> Dear Experts,
>
>       As per ETSI EN 301 489 - 3 Clause 4.3:
>  "Short Range Devices" (SRD) transmitters are excluded from
> conducted & radiated emission measurements, in the transmit
> mode of operation, in the frequencies on which the SRD
> transmitters are intended to operate.
>
>       This seem to be logical & realistic.  When I sent an
> enquiry to FCC about this, I received the below reply. I hope
> I have not raised my question properly  to FCC.
>       I request you the gurus to point me the right clause of
> FCC that gives an exemption to "intentional radiator" from
> the conducted emission testing for the frequency in which it
> is operating.
>
> Sincerely
>
> K.Balasubramanian
> Sr.Engineer, Hardware.
>
> **************************************************************
> **************************************************************
> **************************************************
>
>                       "LabHelp"
>                       <[email protected]>        To:
> <[email protected]>
>                                                cc:
>                       07/02/2004 02:01         Subject:  RE:
> Exclusion bands for Part 15 Sub Part C
>                       AM                        devices
>
>
>
>
>
>
>
>
>       Question:
>
>
>       1. As per ETSI EN 301 489 - 3 Clause 4.3 "Short Range
> Devices" (SRD)
>       transmitters are excluded from conducted & radiated emission
>       measurements, in the transmit mode of operation, in the
> frequencies
>       on which the SRD transmitters are intended to operate.
>
>
>       2. Sections §§ 15.217-15.257 of FCC Part 15, provides
> alternative
>       limits to the general radiated emission limits for intentional
>       radiators operating in specified frequency bands.
>
>
>       3. Similar to the radiated emission, is there any
> alternative limits
>       to the conducted emissions other than the limits
> specified in the
>       section 15.207, for intentional radiators operating in specified
>       frequency bands? If so which part / section  of FCC
> specifies this?
>
>
>       Answer
>       There are no alternatives to the conducted emission
> limits in Section
>       15.207 for intentional radiators operating under
> Subpart C of Part
>       15.
>
> Sincerely
>
> K.Balasubramanian
> Sr.Engineer, Hardware.
>
> -------------------------------------------
>
> This message is from the IEEE Product Safety Engineering
> Society emc-pstc discussion list.
>
> IEEE PSES Main Website:  http://www.ieee-pses.org/
>
> To post a message send your e-mail to [email protected]
>
> Instructions for use of the list server:
>
    http://listserv.ieee.org/listserv/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:

     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc



This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.

IEEE PSES Main Website:  http://www.ieee-pses.org/

To post a message send your e-mail to [email protected]

Instructions for use of the list server:

    http://listserv.ieee.org/listserv/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:

     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

Reply via email to