A small point of difference: AS/NZS 60950.1 was published 15SEP2003. AS/NZS 60950.1 was not yet mandated by legislation, as of a few months ago. I've spoken with more than one company that claimed use that standard on a regular basis.
But then, last I looked (again, a few months ago), unless a product contains TNV circuits, none of the AS/NZS, IEC 60950 based, standards are mandated for use by legislation. Regards, Peter L. Tarver, PE [email protected] > From: Rich Nute > Sent: Thursday, September 02, 2004 10:33 AM > > ... IEC 60950-1. This > standard is not yet accepted in ... > Australia. This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
