In a message dated 10/8/2004 11:22:44 AM Central Daylight Time, [email protected] writes:
All If you know a cabinet-maker or a good carpenter they should know how to construct a non-metallic table for you. Be very clear about the non-metallic part (no nails no screws )and the weight load,and indoor or outdoor usage. They can usually buid it on site. I had a friend build one and I had to explain the non-metallic part a couple of times. I think its not a natural thing to make a non-metallic table. Regards IMHO Dan Anchondo Vivotech,Inc Just as an asside, you may still want to think about buying one. It should be made of plastic parts, not wood. After all the messing is over.... Of course, I'd like to throw Schaffners positioner into the list of options. Derek N. Walton Owner, L F Research EMI Design and Test Facility Poplar Grove, IL 61065 ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
