As usual, I opened my mouth before the brain was connected... If you were refering to the GPIB I/O module that is installed in the (rear/center) Analyzer, then your only hope would be a repair/calibtation lab that still has parts for these units, as Agilent no longer supports this model.
It might be easier to just buy another 8591 from an used instrument dealer. luck, Brian > -----Original Message----- > From: Brian O'Connell > Sent: Tuesday, December 14, 2004 8:45 AM > To: '[email protected]'; [email protected] > Subject: RE: GPIB interface card for HP 8591 Analyzer > > > If the correct DLL is installed, GPIB controllers from > Measurement Computing or National Instruments can be used. > > luck, > Brian > > -----Original Message----- > From: [email protected] [mailto:[email protected]] > Sent: Tuesday, December 14, 2004 8:16 AM > To: [email protected] > Subject: GPIB interface card for HP 8591 Analyzer > > Hi Group > Is anyone in the business of supplying parts for HP/Agilent > equipment or can anyone recommend someone who is in the > business of supplying parts for HP/Agilent equipment (other > than HP and Agilent of course). > I need a GPIB interface card for HP 8591 Analyzer. > Any help is greatly appreciated > Best regards > John Harrington > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
