Hello,
I am embarking on an electronic design for a cctv camera that will employ 8 or
10 layer PCB.
It will include a high speed DSP (400-600MHz internal clock) that requires
both 3V3 and 1V2 supplies
I am considering employing dual power planes rather than segment a single
power plane.
I would appreciate any feedback on...
reference material that outlines pros/cons of either solution single or dual
plane.
Material describing stack options for optimum emc - 8 or 10 layer?
Most of the references I have reviewed do not directly address dual power
layers in the stack.
Any comments appreciated.
Thanks
John Coyle
Senior Engineer
Video Systems
6554 - 176th Street
Surrey, BC Canada V3S 4G5
_____ Honeywell
604.574.1526 x8633 [email protected]
604.574.8523 Fax
---------------------------------------------------------------- This message
is from the IEEE Product Safety Engineering Society emc-pstc discussion list.
Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Ron Pickard: [email protected] Scott Douglas [email protected]
For policy questions, send mail to:
Richard Nute: [email protected] Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
