John No, because previous experience in submitting lists of errors and omissions jointly to the BSI Committe Secretary and the UK Chairman of the IEC/EN committees for 61010 got ABSOLUTELY NO RESPONSE EXCEPT "fill out a form".
NOT encouraging! John Allen -----Original Message----- From: John Woodgate [ mailto:[email protected]] Sent: 01 December 2004 12:17 To: [email protected] Subject: Re: IEC/EN 61010-1, 2001 'Circuits derived from Mains Circuits' In article <[email protected]>, John Allen <[email protected]> writes > IMHO (as an Ex-BSI standards project manager, and a > drafter/reviewer of many in-company procedures and process > documents), the range of definitions is woefully incomplete and > confusing, the text is generally poorly drafted and quite > ambiguous in many places, and together these lead to problems where > there is no clear answer to some obvious questions with huge > implications (like the ones I posed!) nor clear indication of where > suitable answers could be found. Have you told BSI, though? It's the first step to try to get the IEC committee to take the editing task seriously. -- Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Scott Douglas [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc _____________________________________________________________________ This e-mail has been scanned for viruses by MCI's Internet Managed Scanning Services - powered by MessageLabs. For further information visit http://www.mci.com ********************************************************************** Copyright ERA Technology Ltd. 2004. (www.era.co.uk). All rights reserved. The information supplied in this Commercial Communication should be treated in confidence. No liability whatsoever is accepted for any loss or damage suffered as a result of accessing this message or any attachments. ********************************************************************** _____________________________________________________________________ This e-mail has been scanned for viruses by MCI's Internet Managed Scanning Services - powered by MessageLabs. For further information visit http://www.mci.com ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Scott Douglas [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
