John See response to your previous message!
John Allen -----Original Message----- From: John Woodgate [ mailto:[email protected]] Sent: 01 December 2004 12:19 To: [email protected] Subject: Re: IEC/EN 61010-1, 2001 'Circuits derived from Mains Circuits' In article <[email protected]>, John Allen <[email protected]> writes > Also. assuming that we are correct we do need the correct values > for 1.5mm, please could you find a way of making this information > available in advance of the long process of issuing an amendment to > the standards The IEC 'corrigendum procedure' is designed for precisely this purpose. -- Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Scott Douglas [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc _____________________________________________________________________ This e-mail has been scanned for viruses by MCI's Internet Managed Scanning Services - powered by MessageLabs. For further information visit http://www.mci.com ********************************************************************** Copyright ERA Technology Ltd. 2004. (www.era.co.uk). All rights reserved. The information supplied in this Commercial Communication should be treated in confidence. No liability whatsoever is accepted for any loss or damage suffered as a result of accessing this message or any attachments. ********************************************************************** _____________________________________________________________________ This e-mail has been scanned for viruses by MCI's Internet Managed Scanning Services - powered by MessageLabs. For further information visit http://www.mci.com ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Scott Douglas [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
