Dear Experts,
I am in the process of declaring the FCC Part 15 class 'A',
compliance for an add on card manufactured by us. This card will be part of
a panel and the panel contains additional PCBAs. The card has been tested
for compliancy by assembling into a panel. The panel (which is not
manufactured by us) is an FCC compliant one and has its own DoC for part 15
class 'A'.
This card is a digital device which just receive digital data from
some external device (through cable) process it and send the processed
digital data to one of the PCBAs of the panel. D.C. 12 volts power for this
card is provided by the panel. No RF transmitter / receiver is involved
either in the panel nor in the card.
What details my test report should have and how my DoC should be?
Your expert guidelines are requested.
Sincerely
K.Balasubramanian
Project Leader - Hardware.
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
