We are using an HV differential voltage probe to measure the surge waveform of our test generator. (ringwave and combination wave).
Can anyone tell me where to obtain calibration of both rise-time and amplitude accuracy. The manufacturer calibrates the probe using a 150Vp-p 20kHz sine wave, but it occurs to us that the rise-time is critical in order to accurately follow the fast wavefront of a surge waveform. (we're measuring ringwave voltage surges up to 6kV) Thanks, Ralph McDiarmid, AScT Compliance Engineering Group Xantrex Technology Inc. This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
