This type of software will probably work well when the original data set is not required, when long-term retention of data is not an issue, when a subsequent analysis that requires actual data points is not required, when all parametrics for an instrument's configuration are not required, etc.
Nothing beats saving the raw data and all instrument settings. luck, Brian > -----Original Message----- > From: [email protected] [mailto:[email protected]]On Behalf Of David > Want > Sent: Tuesday, August 16, 2005 6:41 AM > To: Dave Grant > Cc: [email protected] > Subject: Re: Software req'd to emulate HP printer > > > This works well for me > > http://www.printcapture.com/ > > -- > David Want > RF Insight Ltd > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
