A fantastic bit of software, in my opinion. Free too. We run this software on any PC with a GPIB interface card. So far, any T&M equipment with a display and a GPIB port has worked, and one can very quickly capture the display. We store plots as *.gif and then insert in test reports.
Another plus is that this s/w automatically saves each capture regardless, so we've been able to recover what we thought was lost. In case the link does not work, search "7470.exe" on the www. http://www.speakeasy.org/~jmiles1/ke5fx/7470.htm Regards, Paul Scott EMC Technologist Electronics Test Centre 302 Legget Drive Ottawa, Ontario K1S 1K4 From: Ronald R. Wellman [mailto:[email protected]] Sent: Tuesday, August 16, 2005 8:30 AM To: Dave Grant; [email protected] Subject: RE: Software req'd to emulate HP printer Hello Dave, Adobe Acrobat. Best regards, Ron Wellman From: [email protected] [mailto:[email protected]]On Behalf Of Dave Grant Sent: Monday, August 15, 2005 9:28 PM To: [email protected] Subject: Software req'd to emulate HP printer Hello all, I am looking for some windows software that will emulate an HP printer. I have a Rhode & Schwarz ESHS10 Receiver and currently print the output to a HP 500 printer. The printer in now not doing so well and I would like to replace it with an old laptop with software that could emulate this printer and produce a jpg or similar of the printed page.. Does anyone know of any such software. I am even willing to purchase it if required. Cheers ... Dave Grant Compliance Engineer Alison Laboratories Ltd DDI: +64 7 838-9829 Fax: +64 7 838-9801 This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
