I used the ESHS10 at least 7 years ago, and generally cannot remember what I did yesterday...
The flash ROM in these instruments can be updated by the user, so see if R&S has any updates available that might add printer options. Or choose a non-graphics mode print-out and dump to any printer with IEE 1284 (centronics) connector. Or do it yourself. I wrote a program for this box that dumped data through the IEEE-488 bus, which I remember not requiring more than a 2 or 3 hours, so crank up the C compiler and pound the keyboard. luck, Brian > -----Original Message----- > From: [email protected] [mailto:[email protected]]On Behalf Of Dave > Grant > Sent: Monday, August 15, 2005 9:28 PM > To: [email protected] > Subject: Software req'd to emulate HP printer > > Hello all, > > I am looking for some windows software that will emulate an > HP printer. > > I have a Rhode & Schwarz ESHS10 Receiver and currently print > the output to > a HP 500 printer. The printer in now not doing so well and > I would like to > replace it with an old laptop with software that could > emulate this printer > and produce a jpg or similar of the printed page.. > > Does anyone know of any such software. I am even willing to > purchase it if > required. This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
