Nothing special needed...just use a taut-line knot.
From: [email protected] [mailto:[email protected]]On Behalf Of Doug Kramer Sent: Thursday, August 04, 2005 2:30 PM To: [email protected] Subject: RE: Antenna Mast Tie Downs - Non Conductive Tensioners Along those lines, your local camping supply store should have some non-metal tent pole support accessories. From: [email protected] [mailto:[email protected]]On Behalf Of John Woodgate Sent: Thursday, August 04, 2005 1:13 PM To: [email protected] Subject: Re: Antenna Mast Tie Downs - Non Conductive Tensioners Elliott Mac-FME001 <[email protected]> wrote (in <D95C77160BF5D6119AC200D0B7B98172145D3329@fl08exm01>) about 'Antenna Mast Tie Downs - Non Conductive Tensioners', on Thu, 4 Aug 2005: >I am looking for a nonconductive tensioner or clamp that I can put at >the end of the rope that will allow us to adjust the rope so that it is >tight at both positions. I may not have understood your problem, but it seems to me that a wooden cleat would work, as they did for hundreds of years on sailing ships. -- Regards, John Woodgate, OOO - Own Opinions Only. Deadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
