Hi, I had just done some searching on the Electronic/electrical sub-assemblies (ESA) meant for automotive, especially those that drains power from the car 12V cigarette socket. It seems there's two type of mark. The small "e" mark govern by EEC via 2004/104/EC directive. The big "E" mark govern by ECE via Regulation No 10.
Which of these requirement/mark is mandatory for Europe? Regards Koh Helge Knudsen wrote: >Hi Kim, > >I will only address the 2004/104/EC Directive, i.e. usage after 1st January >2006 > >If the equipment only is used while the Bus or Truck is parked the equipment >will only need a CE-mark and DoC with reference to the EMC direktive. > >If however the could be in motion, you will need a certificate from a >technical service stating that the equipment not is "immunity related". > >The equipment shall fullfil the 2004/104/EC, but a e-mark and e-Certificate >will not be needed if the equipment is stated as not "immunity related" by a >technical service. > >You may find a list of technical services at one of the pages at: >http://www.europa.eu.int/comm/enterprise/automotive/index.htm >Look under "Information", left side at the buttom. > >The equipment shall be CE-marked and the DoC shal have reference to the >directive 2004/104/EC. > >Best regards > >Helge Knudsen >Test & Approval >Niros Communications A/S >Hirsemarken 5 >DK-3520 Farum >Denmark >Tel +45 44 34 22 51 >Fax +45 44 99 28 08 >email [email protected] > > >-----Oprindelig meddelelse----- >Fra: Kim Boll Jensen [mailto:[email protected]] >Sendt: 3. november 2005 14:47 >Til: EMC PSTC >Emne: Requirements for Buses and trucks > > >Hi all > >What is the EMC requirements for equipment mounted on busses and trucks in >EU. The equipment have nothing to do with the steering or control of the >vehicle. > >Best regards, > >Kim Boll Jensen >Bolls Rådgivning >Ved Gadekæret 11F >DK-3660 Stenløse > >Tlf.: 48 18 35 66 >Fax: 48 18 35 30 >Mobil: 22 99 69 91 > >E-mail: [email protected] >web: www.bolls.dk > >- >---------------------------------------------------------------- >This message is from the IEEE Product Safety Engineering Society >emc-pstc discussion list. Website: http://www.ieee-pses.org/ > >To post a message to the list, send your e-mail to [email protected] > >Instructions: http://listserv.ieee.org/listserv/request/user-guide.html > >List rules: http://www.ieee-pses.org/listrules.html > >For help, send mail to the list administrators: > > Scott Douglas [email protected] > Mike Cantwell [email protected] > >For policy questions, send mail to: > > Jim Bacher: [email protected] > David Heald: [email protected] > >All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > > > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
