I recall somewhere that *if* you have a fuse in both lines,
you MUST have them open at the same time. In other words,
you cannot have two, independent fuses there.
If that requirement is not there, it should be. IMHO
- Robert -
On Thu, 24 Nov 2005 09:12:27 -0000
"James, Chris" <[email protected]> wrote:
> Does EN60065 permit fusing in both line and neutral?
>
>
>
> Regards,
>
>
>
> Chris
>
>
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
