Howdy, Art. I did the original UL evaluation on the Furukawa TEX and TEX-E wires. I just checked their web site
http://www.furukawa.co.jp/makisen/eng/safety/standard.htm#TEXE and see that they make no claims regarding 61558-1. The wire was originally intended only for 950-type power supplies and that appears to remain their primary market. Regards, Peter L. Tarver, PE [email protected] > From: Arthur Michael > Sent: Tuesday, February 14, 2006 6:50 AM > > Hello All, > > I have run into a wall and seek your collective guidance. > > Background: > EN 60335-1 references EN 61558-1 (Transformers), which references EN > 61558-2-17 (SMPS Transformers) > > I'm trying to source triple-insulated wire that meets Annex K of EN > 61558-1 (2005). Annex K is titled, Insulated winding wires for use as > multiple layer insulation". > > Annex K of EN-61558-1 is similar to Annex U of EN 60950-1 but the > requirements are more stringent than specified in EN 61558-1. > _____________________________________________________________________________ Scanned by Sanmina-SCI eShield _______ _____________________________________________________________________ - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
