In message <[email protected]>, dated Thu, 16 Feb 2006, Kim Boll Jensen <[email protected]> writes
>Can I use EN 55011 as a product standard (normally I think of it as a >basically standard) and if so what is the immunity standard then ? These EN550xx standards, except EN 55016 series, which is Basic, ARE product standards, being based on the CISPRxx standards. Unfortunately, they are often used as if they were Basic Standards in cases where they are not in fact suitable, or suitable only with extensive, undocumented interpretation. In your case, EN 55011 is the correct standard to use for spark machines. The applicable immunity standard is the Generic. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk 2006 is YMMVI- Your mileage may vary immoderately. John Woodgate - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
