Kim,

EN55011 is a product family standard (although often used as a basic
standard, including by the generic standard EN 61000-6-4), which clearly
encompasses your product, so is the correct standard to apply and as a
product family standard takes precedence over the generic standard.

In the absence of a specific immunity standard, I would suggest that you
apply the generic immunity standard, EN61000-6-2.

Best regards

Neil R. Barker CEng MIEE FSEE MIEEE
Manager
Compliance Engineering
e2v technologies (uk) ltd
106 Waterhouse Lane
Chelmsford
Essex CM1 2QU
UK

Tel: (+44) 1245 453616
Fax: (+44) 1245 453410
Mob: (+44) 7801 723735



From: Kim Boll Jensen [mailto:[email protected]]
Sent: 16 February 2006 16:13
To: EMC PSTC
Subject: Equipment for spark treatment


Hi all

I have a problem with categorizing a product for CE marking.

The equipment is for spark treatment of plastic surfaces (to make the
surface accept glue, paint etc.)

The product could be a accepted as an EN 61000-6-4 generic industrial
equipment, but when in spark mode the A limit is not enough.

EN 55011 have a Group 2 Class A for amongst other spark erosion equipment.
The equipment will pass the requirements for this group.

Can I use EN 55011 as a product standard (normally I think of it as a
basically standard) and if so what is the immunity standard then ?

Best regards,


Kim Boll Jensen
Bolls Rådgivning
Ved Gadekæret 11F
DK-3660 Stenløse

Tlf.:  48 18 35 66
Fax:   48 18 35 30
Mobil: 22 99 69 91

E-mail: [email protected]
web: www.bolls.dk

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           [email protected]
     Mike Cantwell           [email protected]

For policy questions, send mail to:

     Jim Bacher:             [email protected]
     David Heald:            [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

Reply via email to