Hi all I have a problem with categorizing a product for CE marking.
The equipment is for spark treatment of plastic surfaces (to make the surface accept glue, paint etc.) The product could be a accepted as an EN 61000-6-4 generic industrial equipment, but when in spark mode the A limit is not enough. EN 55011 have a Group 2 Class A for amongst other spark erosion equipment. The equipment will pass the requirements for this group. Can I use EN 55011 as a product standard (normally I think of it as a basically standard) and if so what is the immunity standard then ? Best regards, Kim Boll Jensen Bolls Rådgivning Ved Gadekæret 11F DK-3660 Stenløse Tlf.: 48 18 35 66 Fax: 48 18 35 30 Mobil: 22 99 69 91 E-mail: [email protected] web: www.bolls.dk - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
