John, thanks for clarifying that! I recall a search function on OJ page on Eur-Lex that allowed you to enter the Directive number and it would pretty much take you right to pdfs of the list of standards in the applicable information or notice. You would just look for the most recent one.
I just tried it and can't seem to make it work anymore, however... That was the best way I had found to access the OJ lists. Any other ideas out there? Regards, Mac From: [email protected] [mailto:[email protected]] On Behalf Of John Woodgate Sent: Friday, April 21, 2006 11:55 AM To: [email protected] Subject: Re: Latest adopted version of EN55024 In message <[email protected]>, dated Fri, 21 Apr 2006, Elliott Mac-FME001 <[email protected]> writes >If you are looking for the latest version that has been Harmonized for >application to demonstrate compliance to Essential Requirements of a >Directive, then you could check the current list on Europa > >http://europa.eu.int/comm/enterprise/newapproach/standardization/harmst >d >s/reflist.html > >Just select the link of the applicable Directive and the list of the >current Harmonized standards that you can use should come up. To make it clear, you have to click on the TITLE of the Directive to get the list of standards. Clicking on the Directive number gets you the Directive itself. Finding these lists via the OJ pages is very difficult. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk 2006 is YMMVI- Your mileage may vary immensely. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
