Ghery, CISPR 11 is specifically for ISM RF equipment. It only applies to equipment that intentionally radiates in the ISM bands and should not therefore be quoted for other equipment. My point is that 61326-1:2005 calls (in my opinion, incorrectly) CISPR 11 for all equipment types, when it ought to be CISPR 16 for the non-ISM stuff. Dave C.
From: Pettit, Ghery [mailto:[email protected]] Sent: 07 September 2006 15:51 To: Coleman, David; [email protected] Subject: RE: IEC/EN 61326 & CISPR stds CISPR 16 provides guidance on test equipment, methods and other topics of interest that are appropriate for all product family standards. It is not limited to ISM equipment. Ghery S. Pettit _____ From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Thursday, September 07, 2006 12:14 AM To: [email protected] Subject: IEC/EN 61326 & CISPR stds Group, The previous version of 61326 (1997) referred out to CISPR 16 for emissions tests, except for intentional ISM frequency producing equipment, in which case it calls CISPR 11. In the latest version of 61326-1(2005) para 7.2 references out to CISPR 11 for emissions tests, but still has a separate para for ISM equipment, where it references (if correct, pointlessly) to CISPR 11 again. I believe this is an error and should be, as before, CISPR 16 and CISPR 11 for ISM equipment only. Or have I got it wrong somehow? Regards, Dave Coleman ********************************************************************** IMPORTANT NOTICE The information contained in this e-mail is confidential. It may also be legally privileged. It is intended only for the stated addressee(s) and access to it by any other person is unauthorised. If you are not an addressee, you must not disclose, copy, circulate or in any other way use or rely on the information contained in this e-mail. Such unauthorised use may be unlawful. If you have received this e-mail in error, please inform EADS TEST & SERVICES (UK) LTD immediately by emailing [email protected] or phoning +44 (0)1202 872800 (ask for the I.T. Dept.) and delete it and all copies from your system. www.eads-ts.com ********************************************************************** - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
