Hello Jeff Can we say that it is mandatory but not enforced well? The question here is that how many percentage of products going to certification and what the punishment if no certification?
Regards Kyaw Olympus Technologies Singapore --- SIEMIC PSTC <[email protected]> wrote: > Hello Peter, > > I am glad you took second look at the WPC > Notification but we do NOT agree with your > interpretation of the rules. > > Please see email comments below from Leslie Bai, > our expertise on international approvals, and I also > confirmed with our SISC - SIEMIC India Service > Center, that the approval is MANDATORY! > > ********************* > Hi Jeff, One shall understand the difference > between "License of using wireless equipment" and > "Certification of Wireless Products". WPC Note Item > 3 states that "License is not required to use 2.4GHz > devices", this does not mean the used devices do not > need "Certification". Basically, India WPC Notice > says, 2.4GHz is unlicensed band, i.e. no license is > required to operate at this frequency band (Defined > in Item 3: Use of Wireless equipment), but 2.4GHz > device is still required for Type Certification > (defined in Item 6: Equipment Certification). > > ******************* > > If you need more information, you can contact > Mr.Bai in our San Jose office at (408)526 1188 or > (408) 526 1088, or email him at > [email protected]. > > Best regards > Jeff Jin > SIEMIC InfoTech (China) Ltd. > www.siemic.com.cn > > > > > peter merguerian <[email protected]> wrote: > Jeff, > > I still say voluntary - see item 3 of the same > document: > > 3. Use of wireless equipment in the band > 2.4 GHz to 2.4835 GHz.- Notwithstanding anything > contained in any law for the time being in force, no > licence shall be required by any person to > establish, maintain, work, possess or deal in any > wireless equipment, on non-interference, > non-protection and shared (non-exclusive) basis, in > the frequency band 2.4 GHz to 2.4835 GHz with the > transmitter power, Effective Radiated Power and > height of antenna as specified in the Table below, > namely :- > > TABLE > > Maximum out power of transmitter > Maximum Effective Radiated Power > Height of Antenna > (1) > (2) > (3) > 1 W (30 dBm) in Spread of 10 MHz or higher > 4 W (36 dBm) > Within 5 metres above the roof top of existing > authorized building > > > > SIEMIC PSTC <[email protected]> wrote: > Hello Peter, > > India WPC certification for 2.4GHz is not > volunatry basis but mandatory. On the other hand, > Safety Mark is voluntary basis for India. > > Please refer to WPC Notification > [No.R-11014/17/2004-LR (Pt.)] , 2.4GHz Wireless > Devices > > 6. Equipment.- (1) The wireless equipment > shall be type approved and designed and constructed > in such a manner that the bandwidth of emission and > other parameters shall conform to the limits > specified in the Table referred to in rule 3. > > > I hope this helps. > > Thanks > Jeff Jin > SIEMIC InfoTech (China) Ltd. > www.siemic.com.cn > > > > peter merguerian <[email protected]> wrote: > Bill, > > > WPC is a spectrum allocation body. Their > certification is not needed for India but can be > applied for on a voluntary basis. There are no > mandatory approvals needed at this time. It is ok to > sell in India with the existing FCC/European test > reports. If cord connected, make sure the power cord > has an ISI mark from BIS. > > If you need my help or quotation for WPC > certification, please give me a call at TUV > Rheinland of North America, Pleasanton, SF office > (925) 249-9123 Extension 134 or e-mail me at > [email protected] > > Best Regards, > > Peter > > > > Bill Stumpf <[email protected]> wrote: Hello > group, > Can anyone point me in the direction needed to > test and sell a wireless device (2.4 GHz DSSS) in > India? > > Thanks, > Bill > - > > This message is from the IEEE Product Safety > Engineering Society emc-pstc discussion list. > Website: http://www.ieee-pses.org/ To post a > message to the list, send your e-mail to > [email protected] Instructions: > http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > For help, send mail to the list administrators: > Scott Douglas [email protected] Mike Cantwell > [email protected] For policy questions, send mail > to: Jim Bacher: [email protected] David Heald: > [email protected] All emc-pstc postings are > archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > > > > > > > > > > > --------------------------------- > Get your email and more, right on the new > Yahoo.com - > > This message is from the IEEE Product Safety > Engineering Society emc-pstc discussion list. > Website: http://www.ieee-pses.org/ To post a > message to the list, send your e-mail to > [email protected] Instructions: > http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > For help, send mail to the list administrators: > Scott Douglas [email protected] Mike Cantwell > [email protected] For policy questions, send mail > to: Jim Bacher: [email protected] David Heald: > [email protected] All emc-pstc postings are > archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > > > > > > > > > > > > --------------------------------- > Do you Yahoo!? > Everyone is raving about the all-new Yahoo! Mail. - > > This message is from the IEEE Product Safety > Engineering Society emc-pstc discussion list. > Website: http://www.ieee-pses.org/ To post a > message to the list, send your e-mail to > [email protected] Instructions: > http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > For help, send mail to the list administrators: > Scott Douglas [email protected] Mike Cantwell > [email protected] For policy questions, send mail > to: Jim Bacher: [email protected] David Heald: > [email protected] === message truncated === ___________________________________________________________ All New Yahoo! Mail – Tired of Vi@gr@! come-ons? Let our SpamGuard protect you. http://uk.docs.yahoo.com/nowyoucan.html - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
