Jim, Regarding: The <HAR> option is not available to cord set manufacturers outside of the EU, and my engineering group would like to know if we will run into problems since the cord set must be acceptable in the country of installation HAR cord sets are acceptable in many countries as long as it has a plug approved for their socket outlet (Argentina, Israel for example) However, this is not the case in many other countries where an approved cord set must be supplied with the equipment (Japan, Taiwan, China for example) Best Regards, Peter
"Goedderz, Jim" <[email protected]> wrote: Hi group, Many of the EU countries do not have their own approval mark and instead accept other country approvals as their own. All allow the <HAR> mark to be used instead of using the symbol for each individual agency. If a line cord/cord set has approvals from these countries, would it be acceptable throughout the EU (except UK)? Alternatively, what is the groups experience in using <HAR> cord sets, as opposed to cord sets with individual approvals? The <HAR> option is not available to cord set manufacturers outside of the EU, and my engineering group would like to know if we will run into problems since the cord set must be acceptable in the country of installation. The cord set in question has approvals from: Norway Austria Sweden Denmark Finland France Holland/Netherlands Italy Germany Belgium Thank you for all assistance. James Goedderz Product Safety Engineer Tyco/Sensormatic - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc _____ Need a quick answer? Get one in minutes from people who know. Ask your question on Yahoo! Answers <http://answ rs.yahoo.com/;_ylc=X3oDMTFvbGNhMGE3BF9T zM5NjU0NTEwOARfcwMzOTY1NDUxMDMEc2VjA21haWxfdGFnbGluZQRzbGsDbWFpbF90YWcx> . - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
