Paulo, Check out the Bibliography at the end of IEC 60601-1:2005. References [48] to [54] seem to cover this subject, though I think the emphasis is on 50/60Hz currents. Regards, Jon Griver http://www.601help.com The Medical Device Designer's Guide to IEC 60601-1
On 08/02/07, Paolo Peruzzi <[email protected]> wrote: Yes, thank you, I know them and I've already searched in between. Unfortunately they don't say nothing about limits (neither IEC 60601-2-3, which could be the only suitable standard). Actually I wonder if there is any scientific and experimental paper or guidance to shed light on this issue. Paolo Peruzzi ---------- Original Message ----------- > > There are many standards in the IEC 60601-2 series. Go to: > > http://tinyurl.com/2rkl9p > -- > OOO - Own Opinions Only. Try <http://www.jmwa.demon.co.uk> www.jmwa.demon.co.uk and www.isce.org.uk > There are benefits from being irrational - just ask the square root > of 2. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: <http://www.ieee-pses.org/> http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to [email protected] > > Instructions: <http://listserv.ieee.org/request/user-guide.html> http://listserv.ieee.org/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas [email protected] > Mike Cantwell [email protected] > > For policy questions, send mail to: > > Jim Bacher: [email protected] > David Heald: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: <http://www.ieee-pses.org/listrules.html> http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
