Hi, Thanks for the feedback.
Neil, Yes, you’re right that the DoC should state something like We hereby declare that product xxx confirms to Directive xxx/yy/EC (list all those applicable directive), having been tested to the following standards xxxxxx. But my question is mainly on LVD, specifically the 2006/95/EC since it repealed 73/23/EEC. Will existing shipping product declaring to the 73/23/EEC directive be affected? Do we need to re-declare the DofC to 2006/95/EC in order to continue shipping the product? Our manual has been printed with generic statement stating our product complies to 73/23/EEC directive, are we to scrap it? Regards Koh _____ From: [email protected] [mailto:[email protected]] On Behalf Of Barker, Neil Sent: Wednesday, February 07, 2007 1:28 AM To: 'Stone, Richard'; kohscp; [email protected] Subject: RE: New LVD 2006/95/EC Richard, Koh, A Declaration of Conformity must always declare conformity to the relevant Directive, not to a specific standard - that is the legal requirement. That said, I usually adopt wording along the lines of , " We hereby declare that product xxx conforms to the requirements of Directive xxxx/yyy/EC, having been tested/assessed to the following standards...." Some products will meet 2004/108/EC and some 99/5/EC, but none will comply with both as R&TTE takes precedence over EMC and LVD, embracing the requirements of both. Best regards Neil R. Barker CEng MIET FSEE MIEEE Manager Quality Engineering e2v technologies (uk) ltd 106 Waterhouse Lane Chelmsford Essex CM1 2QU UK Tel: (+44) 1245 453616 Fax: (+44) 1245 453571 Mob: (+44) 7801 723735 From: Stone, Richard [mailto:[email protected]] Sent: 06 February 2007 17:03 To: kohscp; [email protected] Subject: RE: New LVD 2006/95/EC Good question Koh, Regarding the LVD and EN 60950 for ITE products, wouldn't the EN 60950 approval supercede the LVD and thus not require Any mention of LVD on a D of C for europe? Also some products are to meet the 2004/108/EC and some the RTTE directive And not both. Regards Richard, _____ From: [email protected] [mailto:[email protected]] On Behalf Of kohscp Sent: Tuesday, February 06, 2007 11:13 AM To: [email protected] Subject: New LVD 2006/95/EC All, As New LVD, 2006/95/EC repealed 73/23/EEC (including amending directive) from 16 January 2007 onward, all reference to LVD must now state 2006/95/EC. 2006/95/EC is identical to 73/23/EEC (including amending directive). Is this correct? Does this means all declaration must now change from "Product xxx comply with LVD Directive 73/23/EEC as amended by 93/68/EEC." to "Product xxx comply with LVD Directive 2006/95/EC." Will existing shipping product declaring to the 73/23/EEC directive be affected? Do we need to re-declare the DofC to 2006/95/EC in order to continue shipping the product? Our manual has been printed with generic statement stating our product complies to 73/23/EEC directive, are we to scrap it? Not like the new EMC directive 2004/108/EC where we have two years to phase out this statement, assuming product is still in compliance to both new and old EMC directive. But this 2006/95/EC is with immediate effect (16 January 2007). Comments. Looking forward to your opinion/advice. Regards Koh - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
