Everyone

Our first meeting of 2007 has a programme addressing topical issues.

Please see the details below.  All are welcome.  The event is free, but
please note the requirement to register in advance.

We look forward to seeing many of you at the meeting.

Best wishes

Brian  

Brian Jones
EMC Consultant and Competent Body signatory
Chapter Chairman 2007



Event Notice.     IEEE Electromagnetic Compatibility Soc. UKRI Chapter. 

You are invited to attend the forthcoming Afternoon Event on "Topical EMC
Issues" to be held at: Kings College London (KCL)   http://www.kcl.ac.uk/
Strand Campus Central London. 

On Wednesday March 28th 2007.

Location: Room: STD/2B08  

The room (2B08) is in the KCL Strand Building (the large structure right on
the Strand) and is down on the 2nd basement level. Access is via the lifts
or the staircase at the back of the main reception area.  

Agenda.

Technical Meeting theme:  "Topical EMC Issues"

13:00 - 13:10        Welcome

13:10 - 13:50        New EMC Regulations, Peter Howick, DTI.

13:50 - 14:30        Forthcoming Multimedia Standards. Martin Wright, BT.

14:30 - 15:00        Break. Refreshments.

15:00 - 15:40        Cables in EMC testing.  Richard Marshall MA CEng. FIET,
Richard Marshall Limited.

15:40 - 16:20        EMC requirements for radio equipment.  Steve Hayes.
TRL.

16:30                    End.

Information available on speakers and talks:

The new EMC Regulations.  Peter Howick, DTI.

SI 2006 No. 3418, implementing the new EMC Directive 2004/108/EC, has been
published, and comes fully into force on 20 July 2007.  From that date all
new Declarations of Conformity for apparatus must be to the new Directive,
although apparatus with declarations issued prior to that date may be placed
on the market before 20 July 2009 and put into service.  There are relaxed
requirements for apparatus intended for incorporation into a given fixed
installation and otherwise not commercially available, and new requirements
for those who have control of a fixed installation.  The mandatory
requirement for third-party involvement for apparatus for which harmonised
standards have not been applied in full is removed, but there are additional
documentation requirements, in line with other new approach directives.


Forthcoming EMC standards for multimedia equipment.  Martin Wright, BT. 

Two new standards, CISPR 32 and 35, are in development.  When published in
Europe as EN 55032 and EN 55035, they will replace existing standards for
broadcast receivers and information technology equipment, EN 55013, EN
55020, EN 55022 and EN 55024.  They are also expected to replace the EMC
standards for AV and lighting control apparatus for professional use, EN
55103 parts 1 and 2.  CISPR 35 introduces a new concept of considering
individual functions for immunity performance rather than product types,
since the latter are becoming increasingly meaningless as products
incorporate ever more features.  Martin is Chairman of the standards
committee responsible for these standards, and will tell us the latest
position. 

 
Cables in EMC testing,  Richard Marshall. 

Cable placement during radiated emission testing can have a critical effect
on measured emissions, and the results of some recent work on the subject
will be presented. Richard has published widely on the management of the EMC
of cables in the test laboratory and in the real world.  He has a particular
interest in the optimisation of Coupler-Decoupler Networks and Common-Mode
Attenuation Devices.  Recent design work has included analogue electronic
and radio-frequency circuits and systems,  with emphasis on the optimisation
and cost-reduction of their electromagnetic compatibility (EMC).   Tasks
that joined these disciplines have been the design of a high-speed local
area network interfaces to meet both functional and EMC requirements.
Training and consultancy has been provided in all these areas and on the
technical,  organisational and quality aspects of EMC and CE-marking.  As an
active member of the IEE and now the IET he has organised colloquia on "EMC
and Circuit design",  on "EMC of software" and on "EMC and Broadband for the
last mile".  He was a member of the IEE working group on EMC and functional
safety.  He has had a lifelong interest in radio communication.

 

EMC requirements for radio equipment.  Steve Hayes, Director EMC Division,
TRL Compliance Ltd.  

Radio modules are increasingly being fitted to a wide range of products,
>from personal digital assistants and laptops to industrial systems.  What
are the technical requirements, and do the radio standards apply to the
complete finished equipment?  Steve will offer guidance to manufacturers and
system integrators.


The event is an open meeting.  All welcome.

There is no charge for meeting attendance. 

If you plan to attend this event you need to register by informing: Roy
Ediss

Email;  [email protected] 

For registration you will need to provide: 

Name,
Company, (if applicable),
Contact phone number.

Book early to avoid disappointment. 

A refectory is available on the site for attendees to buy lunch if they
wish.

View the location details, map and information on public transport available
at:      KCL Strand Campus
http://www.kcl.ac.uk/about/campuses/strand-det.html 

Car parking is not available on-site. 

For travel by rail for timetable information see:
http://www.nationalrail.co.uk/ 

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           [email protected]
     Mike Cantwell           [email protected]

For policy questions, send mail to:

     Jim Bacher:             [email protected]
     David Heald:            [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

Reply via email to