True, and that's just the easiest curve! Curve 5 is 32 dB harder, or 80 kV/M @ 10 kHz! Ed Price <mailto:[email protected]> [email protected] WB6WSN NARTE Certified EMC Engineer & Technician Electromagnetic Compatibility Lab Cubic Defense Applications San Diego, CA USA 858-505-2780 (Voice) 858-505-1583 (FAX) Military & Avionics EMC Is Our Specialty
_____ From: Ken Javor [mailto:[email protected]] Sent: Thursday, June 14, 2007 11:50 AM To: ieee Subject: Re: GR1089 conducted calibration Relative to the mil-std comparison: A level of 89 dBuA at 10 kHz is the equivalent of 2000 Volts/meter. Further, it assumes a plane wave illumination over a 150 meter length of cabling. It is difficult for me to imagine how such a condition could exist. on 6/14/07 12:35 PM, Bob Richards at [email protected] wrote: Brian, ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
