Hi Bob: If you don't get the programming information you need, you might try looking for a user manual. The web site below has some sources listed under 'Companies Selling Equipment Manuals'. http://www.dbicorporation.com/sources.htm
Pat Lawler EMC/Reliability Engineer SL Power Electronics Corp. Bob Richards wrote on 08/23/2007 01:03:49 PM: > We have acquired a Schaffner NSG 2070, which is a self contained > instrument for performing conducted immunity. It has a signal > generator, amplifier, measurement device, and controller all in one > unit. It is working. However, the manual does not include the > commands to control it via the RS232 port, and I can't find any > information about it anywhere. Schaffner no longer supports this > unit. Does anyone out there have the programming manual or any > information on the command set?? > > Thanks in advance. > Bob Richards, NCT - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
