We have acquired a Schaffner NSG 2070, which is a self contained instrument for performing conducted immunity. It has a signal generator, amplifier, measurement device, and controller all in one unit. It is working. However, the manual does not include the commands to control it via the RS232 port, and I can't find any information about it anywhere. Schaffner no longer supports this unit. Does anyone out there have the programming manual or any information on the command set?? Thanks in advance. Bob Richards, NCT. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
