RF Field depends on cell phone type. Check Table 2 in Ron Brewer and Dawn Trout article in Confirmity, July 1, 2007 http://www.conformity.com/artman/publish/article_204.shtml
Regards, Eugene. ----- Original Message ----- From: "Frank Krozel" <[email protected]> To: <[email protected]>; <[email protected]> Sent: Friday, March 14, 2008 7:35 AM Subject: Re: Cell Phone field strength > John, it has been a long time ago, but... I recall measuring 800Mhz/analog > at about 12V/m at 1cm. > > Don't have any knowledge of newer ones. > > Regards, Frank Krozel > http://www.electronicinstrument.com > Tel: 630-924-1600 > PO Box 6487 <new> > Bloomingdale, IL 60108 > Fax: 630-477-0321 > Serving the Midwest since 1971 > EMC MiniSymposium - http://www.emcchicago.org/sectfiles/events.htm > ----- Original Message ----- > From: <[email protected]> > To: <[email protected]> > Sent: Friday, March 14, 2008 9:17 AM > Subject: Cell Phone field strength > > >> Does anyone have good numbers for the RF Field strength from a hand held >> Cell Phone at 1 cm >> distance? >> >> Thanks in advance >> >> John Merrill >> Product Safety Engineer >> Schneider Automation >> >> - >> ---------------------------------------------------------------- >> This message is from the IEEE Product Safety Engineering Society >> emc-pstc discussion list. Website: http://www.ieee-pses.org/ >> >> To post a message to the list, send your e-mail to [email protected] >> >> Instructions: http://listserv.ieee.org/request/user-guide.html >> >> List rules: http://www.ieee-pses.org/listrules.html >> >> For help, send mail to the list administrators: >> >> Scott Douglas [email protected] >> Mike Cantwell [email protected] >> >> For policy questions, send mail to: >> >> Jim Bacher: [email protected] >> David Heald: [email protected] >> >> All emc-pstc postings are archived and searchable on the web at: >> >> http://www.ieeecommunities.org/emc-pstc > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to [email protected] > > Instructions: http://listserv.ieee.org/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas [email protected] > Mike Cantwell [email protected] > > For policy questions, send mail to: > > Jim Bacher: [email protected] > David Heald: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
