You might find pertinent information here http://www.mthr.org.uk/
From: [email protected] [mailto:[email protected]] On Behalf Of Frank Krozel Sent: 14 March 2008 14:35 To: [email protected]; [email protected] Subject: Re: Cell Phone field strength John, it has been a long time ago, but... I recall measuring 800Mhz/analog at about 12V/m at 1cm. Don't have any knowledge of newer ones. Regards, Frank Krozel http://www.electronicinstrument.com Tel: 630-924-1600 PO Box 6487 <new> Bloomingdale, IL 60108 Fax: 630-477-0321 Serving the Midwest since 1971 EMC MiniSymposium - http://www.emcchicago.org/sectfiles/events.htm ----- Original Message ----- From: <[email protected]> To: <[email protected]> Sent: Friday, March 14, 2008 9:17 AM Subject: Cell Phone field strength > Does anyone have good numbers for the RF Field strength from a hand held > Cell Phone at 1 cm > distance? > > Thanks in advance > > John Merrill > Product Safety Engineer > Schneider Automation > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to [email protected] > > Instructions: http://listserv.ieee.org/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas [email protected] > Mike Cantwell [email protected] > > For policy questions, send mail to: > > Jim Bacher: [email protected] > David Heald: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message (including any attachments) may contain confidential information intended for a specific individual and purpose. If you are not the intended recipient, delete this message. If you are not the intended recipient, disclosing, copying, distributing, or taking any action based on this message is strictly prohibited. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
