In message <[email protected]>, dated Thu, 24 Jan 2008, "Kunde, Brian" <[email protected]> writes:
>We have products that are benchtop models that weigh over 400 lbs. We >have to sit the product on the test table with a boom lift and roll it >into the chamber. How can we do this with styrofoam? Attach helium balloons [1]? Seriously, you obviously do need another solution. I suggest you study the requirements very carefully and enlist the aid of a plastics consultant. Maybe some form of glass-reinforced plastic will work. At least, if the electrical properties are stable you may be able to allow for them. [1]I wonder if an air-bag could be made to work? -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk For very important information, please turn over. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
