Richard, For many countries an in-country representative (usually the importer) is required and this entity becomes the holder of the certificate for the radio device. The in-country rep is also legally held responsible should any problems arise in the field. Now if your system is brought into the country and you are using the same importer (in-country rep) as on the original radio cert obtained by the OEM, no problem. Otherwise, you will need to apply and obtain your own certification. Should you need additional info, you can e-mail me at TUV Rheinland [email protected] Thanks and Best Regards, Peter
"Gartman, Richard" <[email protected]> wrote: Need an opinion on the following; We have taken a nationally know LAN wireless access point product and incorporated it in to our product. The OME product has not been touched, the entire package (antenna, case etc.) is incorporated in to ours and we connect to it by a cable. We have our own package with the access point and our own additional electronics in it. This access point has the necessary certifications from the manufacturer for all markets we will be selling in. Question: do we need to get "intentional radiator" Certification for our product, or can we just use the OEM certification in conjunction with our standard set of EMC data (see below) Radiated Emissions < 1GHz - IEC 55022 Radiated Emissions > 1 GHz - 47CFR/FCC part 15 Conducted Emissions - IEC 55022 Radiated Immunity - IEC 61000-4-3 Conducted Immunity - IEC 61000-4-6 EFT - IEC 61000-4-4 Surge - IEC 61000-4-5 Voltage dips - IEC 61000-4-11 Voltage Interruptions - IEC 61000-4-11 Flicker - IEC 61000-3-3 ESD - IEC 61000-4-2 Thank you for you guidance. W. Richard Gartman, MS, CSP Product Stewardship Manager Texas Instruments, Education Technology 7800 Banner Drive, Dallas, Tx 75251 Office: 972-917-1636 Email: [email protected] Fax: 972-917-0668 URL: www.education.ti.com Please consider the environment before printing this email. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc _____ Looking for last minute shopping deals? <http://us.rd.yahoo.com/evt=51734/*http //tools.search.yahoo.com/newsearch/category.php?category=shopping> Find them fast with Yahoo! Search. - ------------ --------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
